SPRAYON PRODUCTS DIV  SHERWIN-WILLIAMS CO -- KRYLON 1306 WORKABLE FIXATIF  -- 8010-00-401-0421
<pre>=====================  Product Identification  =====================

Product ID:KRYLON 1306 WORKABLE FIXATIF
MSDS Date:08/20/1994
FSC:8010
NIIN:00-401-0421
=== Responsible Party ===
Company Name:SPRAYON PRODUCTS DIV  SHERWIN-WILLIAMS CO
Address:31500 SOLON ROAD
City:SOLON
State:OH
ZIP:44139-5000
Country:US
Info Phone Num:800-777-2966
Emergency Phone Num:216-292-7400
CAGE:09800
=== Contractor Identification ===
Company Name:SAX ARTS & CRAFTS SUB OF BEATRICE COMPANIES INC
Address:2405 S CALHOUN RD
Box:City:NEW BERLIN
State:WI
ZIP:53151
Country:US
Phone:262-784-6880
CAGE:26290
Company Name:SHERWIN-WILLIAMS DIVERSIFIED BRANDS, INC.
Address:26300 FARGO AVENUE
Box:City:BEDFORD HEIGHTS
State:OH
ZIP:44146
Country:US
Phone:216-292-7400 OR 216-595-8634
CAGE:09800

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 15%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9495

Ingred Name:ISOBUTANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 15%
Other REC Limits:NONE RECOMMENDED

Ingred Name:V M & P NAPHTHA
CAS:64742-89-8
Fraction by Wt: 22%
Other REC Limits:NONE RECOMMENDED

Ingred Name:PETROLEUM HYDROCARBON,
CAS:64742-47-8
RTECS #:OA5504000
Fraction by Wt: 2%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:5 MG/M3 (OIL MIST)
ACGIH TLV:5 MG/M3 (OIL MIST)

Ingred Name:TOLUENE (SARA 313) (CERCLA)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 13%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:200 PPM; Z-2
ACGIH TLV:S, 50 PPM; 9495
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ETHYL BENZENE (SARA 313)
CAS:100-41-4
RTECS #:DA0700000
Fraction by Wt: 3%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM
ACGIH TLV:100 PPM/125STEL;9495
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:XYLENES (O-,M-,P- ISOMERS) (SARA 313) (CERCLA)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 13%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM
ACGIH TLV:100 PPM/150STEL;9495
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ACETONE (SARA 313) (CERCLA)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 11%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1000 PPM
ACGIH TLV:750PPM/1000STEL;9495
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:VOLATILE ORGANIC CONTENT = 92%
RTECS #:9999999VO
Fraction by Wt: 92%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:PRODUCT'S LD50 (ORAL RAT) WAS NOT STATED
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE-IRRITATION TO EYES, SKIN &
    REESPIRATORY SYSTEM. MAY CAUSE NERVOUS SYSTEM DEPRESSION. EXTREME
    OVEREXPOSURE MAY RESULT IN UNCONSCIOUSNESS & POSSIBLY DEATH.
    CHRONIC-PROLONGED &/OR REPEATED OVEREXPO SURE MAY CAUSE PERIPHERAL
    NEUROPATHY, ADVERSE EFFECTS TO LIVER, URINARY, BLOOD FORMING, CVS,
    CNS OR REPRODUCTIVE SYSTEMS
Explanation of Carcinogenicity:NO INGREDIENT IN THESE PRODUCTS IS AN
    NTP, IARC OR OSHA LISTED CARCINOGEN. SOME MAY BE LISTED BY
    CALIFORNIA.
Effects of Overexposure:HEADACHE, DIZZINESS, NAUSEA & LOSS OF
    COORDINATION ARE INDICATIONS OF EXCESSIVE EXPOSURE TO VAPORS OR
    SPRAY MIST.
Medical Cond Aggravated by Exposure:NONE GENERALLY RECOGNIZED.

=======================  First Aid Measures  =======================

First Aid:IF IRRITATION PERSISTS OR IS SEVERE, GET MEDICAL ATTENTION.
    EYE:FLUSH W/WATER FOR 15 MIN. SKIN:WASH W/SOAP & WATER. REMOVE
    CONTAMINATED CLOTHING & LAUNDER BEFORE REUSE. INHALED:REMOVE FROM
    EXPOSURE. A ID OR RESTORE BREATHING AS NEEDED. KEEPWARM & QUIET.
    SWALLOWED:GET IMMEDIATE MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:<0F,<-18C
Lower Limits:0.9
Upper Limits:12.8
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:USE FULL PROTECTIVE EQUIPMENT INCLUDING SCBA.
    WATER SPRAY MAY BE INEFFECTIVE, USE IT TO COOL CONTAINERS EXPOSED
    TO FIRE CONDIONS. USE OF FOG NOZZLES PREFERRED.
Unusual Fire/Explosion Hazard:ISOLATE FROM ALL IGNITION SOURCES.
    CONTAINERS MAY EXPLODE WHEN EXPOSED TO HEAT. OVEREXPOSURE TO
    DECOMPOSITION PRODUCTS MAY BE HEALTH HAZARD W/ DELAYED SYMPTOMS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. VENTILATE &
    REMOVE W/INERT ABSORBENT.
Neutralizing Agent:MFR GAVE NO INFORMATION ON MSDS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CONTENTS UNDER PRESSURE. DO NOT
    PUNCTURE, INCINERATE, OR EXPOSE TO TEMPERATURE >120F, HEAT FROM
    SUNLIGHT, RADIATORS, STOVES, HOT WATER. MAY BURST.
Other Precautions:INTENTIONAL MISUES BY DELIBERATEY CONCENTRATING &
    INHALING THE CONTENTS CAN BE HARMFUL OR FATAL. CONTENTS EXTREMELY
    FLAMMABLE. KEEP AWAY FROM HEAT, SPARKS, OPEN FLAME. VAPORS WILL
    ACCUMULATE & MAY IGN ITE EXPLOSIVELY. KEEP FROM CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXPOSURE CANNOT BE CONTROLLED BELOW APLICABLE
    LIMITS BY VENTILATION, USE AN ORGANIC VAPOR/PARTICULATE RESPIRATOR
    APPROVED BY NIOSH/MSHA. FOR SANDING OR ABRADING FILM, WEAR A
    DUST/MIST RESPIRATOR AP PROVED BY NIOSH/MSHA.
Ventilation:LOCAL EXHAUST PREFFERQABLE. USE MECHANICAL (GENERAL)
    VENTILATION IF EXPOSURES CAN BE MAINTAINED EXPOSURE LIMITS.
Protective Gloves:NONE REQUIRED FOR NORMAL APPLICATION
Eye Protection:SAFETY SPECTALSES W/SOLID SIDE SHIELDS
Other Protective Equipment:MFR GAVE NO INFORMATION ON MSDS.
Work Hygienic Practices:USE WITH ADEQUATE VENTILATION. AVOID BREATHING
    VAPOR & SPRAY MIST. ACOID CONTAT W/SKIN & EYES. WASH HANDS AFTER
    USING.
Supplemental Safety and Health
KEEP AREA VENTILATED. DO NOT SMOKE. EXTINGUISH ALL FLAMES, PILOT
    LIGHTS, HEATERS. TURN OFF STOVES, ELECTRIC APPLIANCES. THESE
    COATINGS MAY CONTAIN MATERIALS CLASSIFIED AS NUISANCE PARTICULATES
    WHICH M AY BE PRESENT AT HAZARDOUS LEVELS ONLY DURING SANDING OR
    ABRADING OF THE DRIED FILM.

==================  Physical/Chemical Properties  ==================

HCC:V3
NRC/State Lic Num:NONE
Vapor Pres:SEE CAN
Vapor Density:>1
Evaporation Rate &amp; Reference:>1 (ETHER)
Appearance and Odor:MFR GAVE NO INFORMATION ON MSDS.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MFR GAVE NO INFORMATION ON MSDS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:BY FIRE: CARBON DIOXIDE & CARBON
    MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE FROM THESE PRODUCTS MAY BE HAZARDOUS UNDER
    RCRA (40CFR261) & MUST BE TESTEDTO DETERMINE RCRA WASTE NUMBERS. DO
    NOT INCINERATE. DEPRESSURIZE CONTAINER. DISPOSE OF I/A/W FEDERAL,
    STATE & LOCAL REG ULATIONS REGARDING POLLUTION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.